PRODUCT DESCRIPTION
| Product Name |
Propargyl Alcohol PO |
| Trading Name |
MASOCORR PP |
| Molecular Formula |
C6H10O2 |
| Molecular Weight |
114.14g/mol |
| CAS No |
3973-17-9 |
Synonyms
Propargyl alcohol propoxylate; Basocoor PP; Grolite 990;1-Propargylnaphthalin; Naphthalene,1-(2-propynyl); 1-Propargyloxy-propanol-2; 1-Prop-2-inyl-naphthalin; 3-(1-naphthyl)-1-propyne; 2-Hydroxy-propyl-prop-2-inyl-ether; 1-methyl-2-propargyloxyethanol; 1-prop-2-ynyloxy-propan-2-ol; propylene glycol monopropargyl ether; 1-prop-2-ynyl-naphthalene; Propargyl Alcohol Propoxylate; CAS 3973-17-9, 2-Propyn-1OL with Methyloxirane
SPECIFICATION
| Appearance |
Clear colorless to yellowish liquid |
| Concentration |
65 – 69% |
| Density |
1.00 g/cm3 (20°C) (DIN 51757) |
| PH value |
7.0 – 10.5 (20°C) |
| Boiling Point |
Approx. 100 °C |
| Flash Point |
> 88°C. DIN ISO 2592 |
| Viscosity, Kinematic |
< 100 mm 2/s (20°C) |
| Solubility in Water |
(15°C) Completely soluble |
STRUCTURAL FORMULA: Propargyl Alcohol PO
MAJOR APPLICATIONS
| Masocorr PP is used as an acid corrosion inhibitor. . Concentration is dependent on acid type, acid strength, temperature, contact time, and additional additives in the acid matrix. The recommended concentration range is 0.10 % to 1.0 % of the total acid blend
|
ADVANTAGES
- Masocorr PP can easily be formulated and is compatible with other acid corrosion inhibitor components.
- Masocorr PP can provide long term (24 hours) acid-corrosion protection.
- Masocorr PP is biodegradable in both fresh OCED 301 and marine OCED 306.
- The recommended concentration range is 0.10 % to 1.0 % of the total acid blend. Concentration is dependent on acid type, strength, bottom hole temperature, contact time and additional additives.
- Masocorr PP is compatible with intensifiers for higher temperature conditions.
- Masocorr PP disperses well in acid solutions, resulting in good inhibitor dispersibility in acid solutions.
|
STORAGE CONDITION
| Protect from light, heat and ambient air. Masocorr PP has a shelf life of two years in its sealed original packaging. |
TECHNICAL DATA
| Masocorr PP corrosion testing in different concentrations of HCl at different temperatures, the limit for an acceptable corrosion rate is 0.05 lb/ft² |
PACKING
| Metal or HDPE drum packaging (we can package depending upon customer requirements, e.g. 25, 50 or 200kg). |
Industrial References
Note: Information given in this technical data sheet is based on current knowledge and our laboratory evaluation; it is
presented as per our opinion without any guarantee. Buyers must carry out their own tests and experiments to determine the
suitability and completeness of our products for their use and application.
Propargyl Alcohol PO 
