MALRONIC PE 8100 
MALRONIC PE 8100 is Liquid low foaming wetting Agent used in Dishwasher Detergent, cleaners for Dairy Kitchen Hygiene , used in food and beverages processing.
| Product Name | MALRONIC PE 8100 |
| CAS No | 9003-11-6 |
| HS Code | 34021300 |
| Molecular Mass of Polyethylene Glycol block | 2300g/mol |
| Molar mass, calculated from OH Number | ca. 2600 g/mol |
| Appearance | Colourless Clear or Slightly cloudy liquid |
| Percentage of polyethylene glycol in molecule | 10 % |
| Concentration | ca. 100% |
| In BDG | ca 36℃ |
| In Water | ca 19℃ |
| In saline solution | NA |
| pH (5% in water)* | ca. 7 |
| Density (23℃) | ca. 1.03 g/cm3 |
| Viscosity | ca 700.mPa · s (23℃, Brookfield, 60 rpm) |
| Setting point | ca. -30℃ |
| Wetting | 70 (DIN 53901, in distilled water with 2 g/l soda ash, 23℃) |
| Surface tension** | ca. 35 mN/m |
|
Solubility of Malronic PE types at 23 °C (10 % solutions) Malronic PE 3100 is Soluble in Isopropanol, Toluene,. |
|
Malronic PE 8100 can be employed as a detergent and antifoam in cleaning applications in which a high level of mechanical energy needs to be applied. Synergistic effects can often be obtained if it is combined with other low-foaming surfactants. Typical areas of application include dishwasher detergents, cleaners for the dairy and brewery sectors, and rinse aids. |
| The Malroninc PE 8100 should be kept tightly sealed in a dry place in their tightly sealed original Packing.This product is hygroscopic and soluable in waer. With this they asorb water quickly .Drum should be tightly sealed each time after material is taken . |
| Packaging depending upon customer requirements, e.g. , 50 or 200kg in HDPE/Metal drums, Packing. Etc. |
| The Malronic PE types have a shelf life of at least two years, provided they are stored in their original packaging and kept tightly sealed. |
Note: Information given in this technical data sheet is based on current knowledge and our laboratory evaluation; it is presented as per our opinion without any guarantee. Buyers must carry out their own tests and experiments to determine the suitability and completeness of our products for their use and application.
