MALRONIC PE 9200 
Malronic PE 9200 Colourless clear slightly Cloudy liquid main area of use in all cleaning processes in quick through wetting is essential. It can be used in household and institutional Dish washer Detergent.
| Product Name | MALRONIC PE 9200 |
| CAS No | 9003-11-6 |
| HS Code | 34021900 |
| Molecular Mass of Polyethylene Glycol block | 2750 g/mol |
| Molar mass, calculated from OH Number | ca. 3650 g/mol |
| Appearance | Colourless clear slightly Cloudy liquid |
| Percentage of polyethylene glycol in molecule | 20 % |
| Concentration | ca. 100% |
| In BDG | ca 49℃ |
| In Water | ca 22℃ In saline solution |
| pH (5% in water)* | ca. 7 |
| Density (23℃) | ca. 1.03 g/cm3 |
| Viscosity | ca 900.mPa · s 23℃, Brookfield, 60 rpm |
| Setting point | ca. -3℃ |
| Wetting | >100 s (DIN 53901, in distilled water with 2 g/l soda ash, 23℃) |
| Surface tension** | ca. 35 mN/m |
|
Solubility of Malronic PE types at 23℃ (10 % solutions) Soluble in, Isopropanol, Toluene. |
|
Malronic PE 9200 can be used in all cleaning processes in which quick, thorough wetting is essential. It can be used in household and institutional dishwasher detergents, either alone or in combination with other Malronic PE types. Malronic PE 9200 can be added to acidic rinse aids to prevent dull spots and streaks being formed by water droplets, and it imparts a high gloss to crockery and glass |
| The Malroninc PE 9200 should be kept tightly sealed in a dry place in their tightly sealed original Packing. This product is hygroscopic and soluble in water. With this they absorb water quickly .Drum should be tightly sealed each time after material is taken |
| Packaging depending upon customer requirements, e.g. , 50 or 200kg in HDPE/Metal drums, Packing. Etc. |
| The Malronic PE types have a shelf life of at least two years, provided they are stored in their original packaging and kept tightly sealed. |
Note: Information given in this technical data sheet is based on current knowledge and our laboratory evaluation; it is presented as per our opinion without any guarantee. Buyers must carry out their own tests and experiments to determine the suitability and completeness of our products for their use and application.
